TOTOKU COLOR 3MP LCD MONITOR CCL352I2
With high luminance and high contrast, and an integrated color calibration function, our CCL352i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL352i2 includes a luminance compensation feature for edge to edge consistency, is fully configurable for multi-display applications, and comes standard with hardware-based pivot functionality for fast image drawing in portrait orientation.
New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.* An optional PM Medivisor software is required.
Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.* Images shown are for illustrative purposes only.
High luminance, high quality LCD panel
600 cd/m² and contrast ratio of 600:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.
Accurate color and grayscale reproduction compliant with DICOM Part 14
By calibrating color temperature, luminance, and gamma characteristics, reproduction of colors faithful to the original and smooth display of grayscale are possible.
Built-in 10-bit LUT (look up table) for accurate grayscale reproduction
The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 1021 shades (10bit) to realize finer and smoother grayscale.Hardware pivot function for fast drawing in portrait orientation
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portraitDual Link input
provides smooth display of motion pictures.
OSD Information Display
Such information as the display model, total operating time, actual measurement of luminance, and calibration settings can be checked on screen.LED indicator to inform of current status
A glance at the LED indicator tells you the display's current operating status.Enhanced convenience with utility software :
Advanced power saving*
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.* This feature may not be available, depending on the specifications of the graphics card used.
Gamma check
18 points of luminance values are measured and plotted into a graph.Ambient light and display luminance measurement
The built-in sensors measure display luminance and ambient illuminance.
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.| Model name | CCL352i2 | |
|---|---|---|
| LCD | Technology | 20.8-inch, Color, TFT active matrix |
| Display Area | 423.9 mm x 318.0 mm | |
| Pixel Pitch | 0.207 mm x 0.207 mm | |
| Visual Perfomance | Contrast Ratio | 600:1 (typ) |
| Maximum Luminance | 600 cd/m² (typ), (calibrated to 250 cd/m² by factory default) | |
| Viewing Angle | 170 | |
| Available Resolution | USTEXT, 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 2048 x 1536 (QXGA) | |
| Color Display | Full color (16.77 million colors) | |
| Input Signal | Input Sync Signal | DVI 1.0 compliant |
| Plug and Play | DDC2B compliant | |
| Input Power Supply | Input | AC Adapter 100V-240V (±10%) 50/60Hz |
| Maximum Power Consumption | 130W (typ), (with power management feature) | |
| Features | Calibration Control | Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A calibration kit is required.) |
| OSD Information Display | Model name, Serial No., Total operating time, Calibration settings (Operating time since the last calibration, Luminance, Gamma, Color temp., etc.), Current luminance, etc. | |
| USB Hub | USB Rev. 2.0 compliant, 1 USB upstream connector, 2 USB downstream connectors | |
| Other Features | Luminance Uniformity Correction, Hardware pivot, LED indicator | |
| Standards | UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, FDA510(k) | |
| Physical Characteristics | Dimensions (WxHxD) | Landscape: 474 mm x 468.4/529.9 mm x 220 mm Portrait: 367 mm x 521.9/583.4 mm x 220 mm |
| Weight | Approx. 11 kg (Approx. 6.8kg without tilt stand) | |
| Tilt Stand | Tilt, swivel, landscape/portrait rotation | |
| Mount | 100 mm VESA compliant | |
| Security Slot | On the back of the panel and the tilt stand | |
| Accessories | AC adapter, 3P power cord, DVI cable, USB cable, User manual | |
Dimensions
