TOTOKU GRAYSCALE 3MP DISPLAY ME355I2
A 3MP display best suited for chest X-rays. Loaded with a high luminance, high contrast LCD panel, it delivers excellent image quality with a luminance uniformity compensation feature and a capability to display 2048 shades of gray simultaneously. It also comes with a hardware-based pivoting function for fast image display in portrait orientation.
Request a Quote for Totoku Grayscale 3MP Display ME355i2:
New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance
control circuit. The luminance sensor, integrated into the front bezel,
consistently monitors and accurately stabilizes luminance on the screen by
rapidly communicating with the backlight sensor.
In addition, a build-in
luminance sensor provided with i2 models enables even simpler calibration
without attaching the calibration sensor.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.
Simultaneous display of 2048 shades of gray
Combined with a viewer software, 2048 shades of grapy (11
bit) can be simultaneously displayed, realizing smoother grayscale.
* Viewer
software that supports Totoku's multi-shade display system is required for
11-bit grayscale viewing
Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity
across the screen. Luminance unevenness is minimized in the final tune-up prior
to shipping.
* Images shown are for illustrative purposes only.
Calibration function
Calibrates luminance and gamma to enable smooth grayscale
display that is faithful to DICOM GSDF.
* Optional calibration kit is
required.
Hardware pivot function for fast drawing in portrait on landscape orientation
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait.
Dual Link input
provides smooth display of motion pictures.
Color/monochrome conversion function for multi-display setups with both
color and monochrome displays
OSD Information Display
With a push of a button, the display's current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.
LED indicator to inform of current status
A glance at the LED indicator tells you the display's current operating status.
Enhanced convenience with utility software:
Advanced power saving*
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.* This feature may not be available, depending on the specifications of the graphics card used.
Gamma check
18 points of luminance values are measured and plotted into a graph.Ambient light and display luminance measurement
The built-in sensors measure display luminance and ambient illuminance.Pairing service to match colors of two displays (Optional)
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.
| Model name | ME355i2 | |
|---|---|---|
| LCD | Technology | 20.8-inch, Monochrome,TFT active matrix |
| Display Area | 423.9 mm x 318.0 mm | |
| Pixel Pitch | 0.207mm x 0.207mm | |
| Visual Perfomance | Contrast Ratio | 900:1(typ) |
| Maximum Luminance | 1000 cd/m², (calibrated to 410 cd/m² by factory default) | |
| Viewing Angle | 170 ° | |
| Available Resolution | 640x480(VGA),800x600(SVGA),1024x768(XGA),2048x1536(QXGA) | |
| Grayscale Display | 11.9 bit (3826 shades of gray) to 256 shades of gray along with the customized viewer,simultaneous display of 11 bit(2048 shades of gray) is possible | |
| Input Signal | Input Sync Signal | DVI 1.0 compliant |
| Plug and Play | DDC2B compliant | |
| Input Power Supply | Input | AC Adapter 100V-240V(±10%) 50/60Hz |
| Maximum Power Consumption | 85W (with power management feature) | |
| Features | Calibration Control | Luminance, Gamma,Capability of saving 3 sets of LUT settings(An Optional calibration kit is required). |
| OSD Information Display | Model Name,Serial No.,Total operating time,Calibration settings(Operating time from Last Calibration,Luminance,Gamma,etc..), Current Luminance , etc.. | |
| USB Hub | USB Rev 2.0 compliant,Self powered,USB upstream connector(x1),USB downstream connector(x2) | |
| Other Features | Luminance Uniformity Correction Function,Hardware Pivot function,Color/Monochrome conversion function,LED indicator | |
| Standards | UL60601-1,CS C22.2 No.601.1,MDD/CE,FDA510(k),FCC-B,VCCI-B,MIC,(CCC:pending) | |
| Physical Characteristics | Dimensions (WxHxD) | Landscape:474mmx 468.4/529.9mmx220mm Portrait: 367mmx521.9/583.4mmx220mm |
| Weight | Approx. 11kg(Approx 6.8kg without tilt stand) | |
| Tilt Stand | Tilt,Swivel,Protrait/Landscape rotation | |
| Mount | 100mm VESA complaint | |
| Security Slot | On the back of the panel and the tilt stand | |
| Accessories | AC Adapter,Power Card(3P),DVI cable,USB Cabel,User Manual | |
Dimensions
